|Bump Steer Kit|
|Written by Peter|
|Tuesday, 19 February 2008|
Compensating for the lowered suspension
Here's a quick article on what bump steer is.
To correct it, I made a bump steer kit. Of course, nothing is available for the XR, but I took a design for a Mustang and sourced my own parts.
To quickly summerize, I use:
Scorpio Tie Rods, 3/8" cut off each end
M14x2.0 Female Tie Rod Ends from Pegasus
M14x100 bolts from McMaster Carr
M14x2 Locking Nuts, also from McMaster
M12 Rod End spacer drilled to M14, purchased from Coleman Racing
Various bump steer spacers, also puchased from Coleman.
Project is coming along nicely. Here are the pictures so far:
|Last Updated ( Tuesday, 19 February 2008 )|