Polls

How's the new site?
 

Syndicate

AN Lines PDF Print E-mail
Written by Peter   
Tuesday, 29 January 2008

My goal with this page is to document as I transition from the traditional plumbing of the engine bay to all AN Fittings with Stainless Lines.

 

My goal with this page is to document as I transition from the traditional plumbing of the engine bay to all AN Fittings with Stainless Lines.

Project 1 was to convert the turbo water feed/return lines to AN. For this I used the following parts:

*Parts list goes here!*

Part 2 was to replace the turbo drain line with a sweet little AN setup. I had a setup from MAX PSI racing, but with my new centermount turbo it was not long enough. So I hacked together a conconction of fittings from Lowes that sorta worked, but they ended up binding the line so I eventually took it all out and made my own.

For this, I used a NPT to AN adaptor out of the block, a 45deg -8AN from that adapter, and a 90deg -8AN to the turbo.

 

 

 

 

 

Last Updated ( Tuesday, 29 January 2008 )
 
< Prev   Next >
Joomla Templates by Joomlashack
Joomla Template Design